VONTAR C1: cooler for TV box and router
The problem with overheating of a set-top box or network equipment makes the user think - to buy a cooling system. Naturally, at the lowest price and with a convenient connection. The Chinese offer an interesting solution - VONTAR C1: a cooler for a TV box and a router. By the way, the Technozon channel made an interesting review of this device.
Technical characteristics of VONTAR C1
| dimensions | 80x80x25 mm |
| The weight | 66 grams |
| Food | USB |
| Rated voltage | 5 Volt |
| Minimum current | A 0.25 |
| Speed | 2500 rpm |
| Air flow | 19 CFM |
| Noise level | 26dB |
| backlight | No |
| Speed control | No |
| Length of cable | 300 mm |
| Declared deadline | 35000 hours |
| Price | 6-7 $ |
VONTAR C1: cooler for TV box and router
In fact, this is a regular 80 mm fan, which is equipped with a USB port, instead of the standard 2-pin connector for the motherboard. For convenient capture of air from below, small plastic legs are provided. The upper part (for equipment installation) has rubber pads that prevent transmission of vibration to the device.
There are no complaints about the fan during operation. He regularly drives a stream of air on the bottom of the console or router. However, for better efficiency, the cooled device should have a grill for the passage of air from below. And, accordingly, slotted connectors on the sides - to remove the heated air from the equipment. If the TV box or network equipment is in a tightly closed case (without holes), then the efficiency will be minimal. In such cases, it is better to buy a more advanced cooling system.
In other cases, VONTAR C1: cooler for TV box and router shows excellent results in work. Given the price, the device is indispensable for cooling oversized equipment. It can be used with heating mobile equipment of any class. For example, with phones and tabletsthat get very hot on fast charging.
Found in VONTAR C1 and disadvantages. The legs of the device slide on any surface. It is better to wrap them with a stretch tape or stick on rubber heels. Case with cooler - one-piece design. After the failure of the fan, you will have to throw everything into the scrap.