Laser level KAIWEETS KT360A 3 x 360 Line
The level is a three-line laser level. The equipment is considered control and measuring and is focused on use in construction. A feature of the device is the presence of smart electronics capable of self-leveling levels that work in 3 dimensions. Illumination of the level occurs due to the built-in high-power LEDs. One such level can immediately replace several construction tools:
- Ruler.
- Plumb line.
- Square.
- Mechanical or electronic level.
- Building rule.
The equipment not only draws lines for marking on any surface. With it, it is convenient to draw lines, axes, measure length, set points. You can put the level at an angle, for marking more complex shapes, for example, for decorative decoration of the room.
Self-leveling level KAIWEETS KT360A 3 x 360
The most important advantage of the control and measuring device is complete autonomy in operation. Removable batteries provide such conditions for the level. The Kaiweets KT360A comes with 2 3.7V 7.5Ah (7800mAh) batteries. One charge is enough for 20 hours of continuous operation. There is a charger, a case, a target and very detailed instructions for use and setup.
Chip laser level in ease of use. By themselves, the diodes are very bright, it is possible to adjust their glow. It is convenient to carry out not only marking on walls, ceiling or floor, but also on existing objects or other objects. If desired, one or more laser lines can be disabled if they are not needed.
For professionals, it is better to immediately buy a tripod for the level. Or use the available one for other equipment. The connector is standard, which simplifies work and saves money. When carrying out construction and repair work, at the time of calculating building materials, such a “toy” will make it clear to the customer that the performer is far from an amateur.
A digital pendulum is installed inside the level. If you hook the device in the operating mode, then the automatic self-leveling system is activated. By flashing the laser lines, the level will inform the user about the displacement, after which it will automatically return the laser marking to its original position.
Technical characteristics of the level KAIWEETS KT360A 3 x 360
| Body material, protection | ABS plastic, IP54 (dust and splash water) |
| Equipment weight | 1.94 kg (with battery) |
| dimensions | 139x117x98 mm |
| Laser level | LED, green lines, 3 pcs 360 degree |
| Laser wavelength, distance | 505-550 nm, up to 60 meters |
| Temperature mode of operation | -10 to 50 degrees Celsius |
| Level error | 0.3 mm per 1 meter of measurement length |
| Management | Push-button, there is an LCD screen |
| self leveling | Automatic, by button, within 4 degrees |
The level will be useful for builders and companies that provide construction tools for rent. The equipment has an extremely simple design, has high strength and wear resistance. You can find out the details or buy KAIWEETS KT360A 3 x 360 on the official website of the manufacturer on our website. affiliate link (with 9% discount).