VONTAR C1: Cooler for TV Box and Router

VONTAR C1: Cooler for TV Box and Router

Problems with overheating of a television set-top box or network equipment lead the user to think – buy a cooling system. Naturally, at the minimum price and with convenient connection. The Chinese offer an interesting solution – VONTAR C1: Cooler for TV box and router. By the way, the Technozon channel made an interesting review of this device.

Technical Specifications of VONTAR C1

 

Dimensions 80x80x25 mm
Weight 66 grams
Power Supply USB
Nominal Voltage 5 Volts
Minimum Current 0.25 A
Speed 2500 RPM
Airflow 19 CFM
Noise Level 26dB
Backlight No
Speed Regulator No
Cable Length 300 mm
Declared Lifespan 35000 hours
Price $6-7

 

 

VONTAR C1: Cooler for TV Box and Router

 

In fact, this is a standard 80 mm fan equipped with a USB port instead of the standard 2-pin connector for the motherboard. For easy air intake from below, small plastic legs are provided. The top part (for installing equipment) has rubber pads to prevent vibration transmission.

vontar-c1-cooler-for-tv-box-and-router

During operation, there are no complaints about the fan. It reliably blows air onto the bottom of the set-top box or router. However, for better efficiency, the cooled device should have a grille for air passage from below. And, accordingly, slotted openings on the sides to remove heated air from the equipment. If the TV box or network equipment is in a tightly closed case (without holes), then the efficiency will be minimal. In such cases, it is better to buy a more advanced cooling system.

vontar-c1-cooler-for-tv-box-and-router

In other cases, VONTAR C1: Cooler for TV Box and Router demonstrates excellent results in operation. Considering the price, the device is indispensable for cooling oversized equipment. It can be used with heating mobile devices of any class. For example, with phones and tablets, which heat up significantly during fast charging.

vontar-c1-cooler-for-tv-box-and-router

VONTAR C1 also has some drawbacks. The legs of the device slide on any surface. It is better to wrap them with stretch tape or stick rubber feet. The case with the cooler is a single construction. After the fan fails, the entire unit will have to be discarded.